PUREHINO GENUINE PARTS

Hino’s research and development is world class and the results show: Hino trucks are rated among the highest in the market for customer satisfaction, quality & longevity. For you, that means more profit now & long-term high residual value. Hino Genuine Parts are engineered utilizing the highest quality materials and specifications. Each part is perfectly matched to work optimal together and to the precise specifications of the engine, transmission, body and vocation. Insisting on Hino Genuine Parts ensures long term performance backed by the industry leading Hino Trucks warranty.

 

The bottom line? If you're not using PUREHINO Genuine Parts, you're not maximizing your vehicle's potential.

HINO TRUCKS GENUINE ENGINE OIL

ENGINEERED & APPROVED BY HINO MOTORS LIMITED

FOR USE IN ALL HINO TRUCKS | ALL MODEL YEARS

HINO GENUINE SYNTHETIC BLEND ENGINE OIL:

Achieves a new standard for today’s high performance diesel engine oils. Its advanced protection technology breaks the mold for low temperature flow, extreme wear protection, breakdown resistance, reduced deposits & overall top shelf quality.

 

WEAR REQUIREMENTS:

Hino Genuine Oil far exceeds the CK-4 wear requirements ensuring long term engine performance & reliability.

 

EMISSION SYSTEM COMPLIANCE:

This special, low ash formulation reduces the blocking of particulate filters and the poisoning of exhaust after-treatment devices, helping to maintain vehicle emission compliance.

 

FUEL ECONOMY:

Independent test results have proven that Hino Genuine Oil provides notable fuel economy benefits when compared to 15W-40 viscosity products.

 

EXTENDED OIL LIFE:

Hino Genuine Oil provides extended drain intervals (up to 20,000 miles), keeping your truck where it belongs - moving down the road.

 

 

HINO GENUINE MOTOR OIL MEETS THESE SPECIFICATIONS:

  • Hino Trucks - All Model Years
  • Cummins CES 20086, 81
  • API CK-4, CJ-4, CI-Plus, CI-4, CH-4
  • API SN
  • ACEA E9
  • Caterpillar ECF-3, ECF-2
  • Cummins CES 20086, 81
  • Detroit Fluids Specification (DFS) 93K222, 93K218
  • Deutz DQC III-10 LA
  • JASO DH-2
  • Mack EOS-4.5, EO-O Premium Plus
  • MAN M 3575
  • MB-Approval 228.31
  • MTU Category 2.1
  • Volvo VDS-4.5, VDS-4

 

 

1 gallon jug

3 gallons per case

24 cases per pallet 72 total gallons per pallet

 

55 gallon drum – 4 drums per pallet

15000-0008

 

 

 

15000-0009

PART NUMBER:

DESCRIPTION

HINO GENUINE COOLANT

CHANGE INTERVALS UP TO 500,000 MILES. PROTECTION YOU CAN RELY ON.

ENGINEERED FOR YOUR HINO TRUCK UP TO MODEL YEAR 2021

Hino LLC EX-PLUS is a high performance ethylene glycol base Long life coolant engineered specifically for Hino trucks.  Formulated to work specifically with the metals and  non-metal materials in Hino engines, Hino Blue and Pink Coolants not only reduce cavitation erosion but provide long life protection.

 

 

500,000 MILE CHANGE INTERVAL: CONVENTIONAL

Hino Blue Coolant  for Hino’s Conventional Models (238-338) provides a 4 year/500K change Interval

 

 

360,000 MILE CHANGE INTERVAL: CAB-OVER

Hino Pink Coolant  for Hino’s Cab-over Models (155-195) provides a 3 year/360K change Interval

 

CLIMATE CONTROL: Hino Genuine Coolants have excellent anti-freeze performance and over-heat prevention for all climates.

 

CLIMATE FRIENDLY:  Coolant does not contain the inhibitors (silicate, amine, nitrite, and etc.) which may cause environmental issues & problems in cooling systems.

 

NON-METAL COMPATIBILITY:  Coolant is compatible with non-metal materials (rubber, resin parts) and performs well with these materials.

Hino Blue Coolant in Gallon Jug

Hino  Blue Coolant in 55 Gallon Drum

Hino Pink Coolant in Gallon Jug

Hino Pink Coolant in 55 Gallon Drum

HB-EXLLC-01

HN001234097

HP-LLC-01

HN001234096

PART NUMBER:

DESCRIPTION

HINO GENUINE FILTERS

FOR HINO ENGINES UP TO MODEL YEAR 2021

UP TO 20% HIGHER CAPACITY THAN

OTHER BRANDS.

ENGINEERED FOR YOUR HINO ENGINE

Hino Genuine Oil Filters are engineered for the reduced oil amounts that are unique to Hino engines. They are specifically designed for the higher fluid cycles that less oil requires and the longer drain intervals of Hino engines - the result: Hino Filters deliver up to 20% higher capacity than other filters on the market. Hino Genuine Filters also lead the market with efficiency in the 30 to 40um micron range which is necessary to provide the right level of protection. The bottom line? If you’re not using Hino Genuine Filters you may be damaging your engine.

 

HIGH CAPACITY

Hino Filters deliver the highest capacity on the market. Low capacity filters mean a shorter filter life and higher potential for system bypass - a condition that allows unfiltered lubricants to enter the engine.

 

HIGH EFFICIENCY

Hino Filters are leaders in efficiency in the 30-40um micron range for particulates. Low efficiency means a lack of protection and higher component wear.

 

EFFICIENCY & PRESSURE DIFFERENTIAL (FLOW) ENGINEERING

The Hino Trucks Genuine Oil filter has nearly a 100% efficiency rating at 30 microns, while maintaining the lowest pressure differential on the market (to allow proper oil flow to the engine). Lower efficiency or higher pressure differential will lead to engine damage.

OIL FILTER SET - Conventional / NAPS 6CYL

HINO ENGINE

 

OIL FILTER SET - Cab-Over Engine

15613E0110

 

 

S156072051

PART NUMBER:

DESCRIPTION

Uptime is critical to any fleet or transportation business, no matter what the size. At Hino we're dedicated to providing not just genuine parts but parts delivery at the speed of business. From our national Parts Distribution centers to our quick ship program and dealer inventory management we are committed to uptime.

QUICK SHIP

PROGRAM

Emergency orders placed by your dealer will ship the same day if they order by 10:00pm Central time!

Next Day Air and Saturday delivery options available.

 

FIND YOUR LOCAL DEALER HERE

OUR NATIONWIDE PARTS DISTRIBUTION CENTERS

ARE DEDICATED TO PROVIDING A NEW LEVEL OF SERVICE IN PARTS.

HINOSTYLE ACCESSORIES

HinoStyle makes any Hino truck stand out from the crowd. GET NOTICED!

 

Most trim pieces are made from premium quality highly polished 304 grade stainless steel with noncorrosive and non-magnetic properties. Our steps are made from highly polished 430 grade stainless steel that can endure the constant use associated with the commercial truck environment. All adhesive trim products use a double sided heavy duty 3M adhesive tape to create an ultra-strong bond to painted surfaces. Installation instructions are included with each item.

 

Major components (sun visors, hood deflectors) include step-by-step instructions for assembly and installation. It is recommended that installation be completed by an experienced Dealership Professional utilizing the proper tools and techniques. Hino Stainless Steel products (excluding electrical components) carry a 12 month/unlimited mileage product warranty against defects in material or workmanship.

EXPRESS YOURSELF!

These HinoStyle Accessories & more are available for your Hino Truck today! Download the catalog & call your local Hino Trucks Dealership to check them out.

Air Deflectors

Air Horns

Anti-Sail Mud Flaps

Bumper Bars

Bumper Hook Covers

Cab Side Trim

Central Bumper Plates

Door Handle Trim

Door Window Trim

Floor Mats

Front Fender Guards and Trim

Hood Deflectors

Hood Latch Inserts

Hub Cover Kits

License Plate Covers

Locking DEF Caps

Locking Fuel Caps

Marker Light Trim

Mirror Kits

Mud Flaps

Seat Belts

Seat Covers - Tactical

Steps & Step Covers

Sun Visors

Tool Boxes

Wheel Simulators

Window Visors

 

SAFETY DATA SHEETS (SDS)

CONTACT OUR PARTS SPECIALISTS

Hino 338 Medium Duty Truck Chassis

L SERIES

Hino 195 Hybrid Truck Chassis - Double Cab

XL SERIES

XL7 33,000 GVW

 

XL8  62,000 GVW

L6   25,950 GVW

 

L7   33,000 GVW

SIGN UP FOR OUR E-NEWSLETTER:

SEARCH THE HINO TRUCKS WEBSITE:

©2019 HINO MOTORS SALES U.S.A., INC.